Mike Larocco- 2000 World Supercross Champion.
AMSOIL Protected All The Way!

AMSOIL Series 2000 Synthetic 2-Cycle Racing Oil (TCR) is a formulation of  carefully selected synthetic basestocks and premium additives, providing  excellent performance in both air cooled and water cooled two-cycle motors. AMSOIL TCR is fortified with corrosion inhibitors to prevent rust from  condensation at shut down and during off-season storage. The AMSOIL racing  formulation is based on extensive research conducted both in laboratories and on the race track. AMSOIL TCR provides superior lubrication, protection and  performance for two-cycle motors in the most demanding applications.

Reduces Friction and Heat

In extreme conditions where operating temperatures are high, two-cycle motors  lose power and torque. The aluminum pistons expand from heat and cause an increase in friction. AMSOIL Series 2000 2-Cycle Racing Oil is a special blend  of synthetic basestocks and additives that reduce friction, prevent  metal-to-metal contact and provide maximum protection against piston scuffing.
PDF 2-Cycle Brochure

Increased Torque for More Power

The ASTM D-4863 two-cycle motor lubricity test measures torque output at 350ºC (662ºF). Higher torque output means better lubricity and more power. This test is a requirement for NMMA TC-W3 and API TC specifications. AMSOIL Series 2000 2-Cycle Racing Oil minimizes power loss due to  friction.

Compatibility

AMSOIL TCR is fully compatible with TC-W3 lubricants and most other two-cycle oils. For best performance, minimize cross contamination.

Keeps Engines Clean

AMSOIL Series 2000 2-Cycle Racing Oil contains additives that have been  tested and proven to provide superior cleanliness in both air and water-cooled  motors. AMSOIL Series 2000 2-Cycle additives inhibit the formation of deposits  in the ring grooves, in the combustion chamber and on the exhaust power valves.  With AMSOIL Series 2000 2-Cycle Racing Oil rings do not stick and spark plugs do  not foul from carbon deposits, and exhaust power valve maintenance is minimized.

Applications

AMSOIL Series 2000 2-Cycle Racing Oil is recommended in air or water-cooled  two-cycle motors where NMMA TC-W3, API TC, ISO EGD or JASO FC oils are specified. Excellent for both racing and recreational use in snowmobiles, outboard motors, personal watercraft, motorcycles and AIVs. Not recommended for use with nitro-methane or alcohol fuels.

Recommended for use at a 50:1 mix ratio for both racing and recreational use.  Also recommended for use in all oil injection systems. Recommended for use with catalytic converters.

Product Warranty

AMSOIL INC. warrants that the use of its lubricants will not cause mechanical damage to mechanically sound equipment when AMSOIL products are used in full  compliance with AMSOIL recommendations.

New Motors Under Warranty

The use of AMSOIL TCR will not void new motor warranties. AMSOIL TCR meets the performance specifications shown above and may be used in two-cycle motors requiring oils meeting the specifications shown.

Synthetic 2-Cycle Oils

Reduce friction and wear, improve throttle response and deliver maximum  power. Clean-burning ashless formulations prevent plug fouling and carbon deposits. Deliver quick, dependable starts. Reduce smoke and emissions and won't  "load up" during prolonged idling. Provide outstanding cold temperature flow. Contain special anti-rust agents for off-season storage.

AMSOIL Synthetic 2-Cycle Oils are superior quality lubricants which provide  maximum protection and outstanding performance in all two-cycle gasoline engines. 

Maximum Wear Protection

AMSOIL Synthetic 2-Cycle Oils are high film strength oils that virtually eliminate metal to metal contact so piston scuffing is prevented and wear is reduced. The high lubricity of AMSOIL Synthetic 2-Cycle Oils reduces friction so  operating temperatures are controlled and maximum engine performance is  achieved.

Reduced Engine Deposits

AMSOIL Synthetic 2-Cycle Oils contain top performing additives which have  been tested and proven to minimize high temperature deposits. These oils resist  oil breakdown from heat so they do not form gum, varnish, sludge or sticky  deposits. Spark plug fouling and excessive carbon build-up in the combustion  chamber, exhaust port and ring area are greatly reduced. In addition, the clean  burn characteristics and lean mix ratios reduce smoke and exhaust emissions.

Prevents Rust and Corrosion

AMSOIL Synthetic 2-Cycle Oils contain special rust and corrosion inhibitors,  providing excellent off-season storage protection.

Outstanding Low Temperature Performance

Both AMSOIL Synthetic Injector Oil and 100:1 Pre-mix Oil mix readily with fuel even in low temperatures. However, AMSOIL Injector Oil with its  -45°F pour point and SAE #4 miscibility and fluidity rating, is better suited for severe cold. It is recommended for use in injector systems as well as 50:1 pre-mix. Also, AMSOIL injector oil will help ease starting because it does  not solidify or get gummy in the motor which allows it to turn over more freely